72V263L6BC
| Parameters | |
|---|---|
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
72V263L6BC Overview
This FIFO memory chip is packaged as a Bulk .Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO consists of 100 terminations, which indicates that FIFO means is empty.FIFO design has 100 operation pins.For its operation, 35mA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 3.15V volts.FIFO memory can handle a maximum supply voltage of 3.45V volts.It has a total of 100 pins on it.It is capable of maintaining good accuracy with a frequency of 166MHz .A FIFO memory's maximum value of 166MHz can be used for regular operation.
72V263L6BC Features
FIFOs category
Frequency at most
72V263L6BC Applications
There are a lot of Integrated Device Technology (IDT) 72V263L6BC FIFOs Memory applications.
- Industrial Systems
- Medical Monitoring Device
- Portable Information Devices
- Firmware loaders
- Buses
- Analog-to-digital converters
- Microprogramming
- IP Radio
- Event Recorder
- Network switching/routing
