72V263L6BCG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO BE CONFIGURED AS 16K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 8KX18 |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V263L6BCG8 Overview
In terms of packaging, it comes in Tape & Reel cases.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V there is the possibility of high efficiency.I found that it has 100 terminations in FIFO means.In the case of the operation pins, they are 100 pins.In order to operate FIFO design, a maximum current of 35mA is required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 100 pins in total.A FIFO memory's maximum value of 166MHz can be used for regular operation.Additionally, this FIFO memory is capable of generating IT CAN ALSO BE CONFIGURED AS 16K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE as well.
72V263L6BCG8 Features
Frequency at most
72V263L6BCG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V263L6BCG8 FIFOs Memory applications.
- Video
- Character generators
- Video time base correction
- Notebook
- Network switching/routing
- High-speed disk
- Address mapping
- MP3 Interface for Automobile
- Code converters
- Temporary storage elements
