72V263L6PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 18kB |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Data Bus Width | 18b |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V263L6PFG Overview
The TQFP package contains FIFO memory chip.There is a memory of 18kB on the FIFO chip that can be used to store applications and data.Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 3.3V .A total of 80 terminations can be found in FIFO means.80 pins are the operation pins.Its maximum operating current is 35mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.There is a maximum supply voltage of 3.45V volts that FIFO memory can handle.There are a total of 80 pins on this FIFO memory IC.A frequency of 166MHz is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 166MHz .By using 1 circuitry, FIFO memory chip has enhanced flexibility.
72V263L6PFG Features
18kB memory size
FIFOs category
Frequency at most
72V263L6PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V263L6PFG FIFOs Memory applications.
- Fabrication Site
- SPI Bus Flash Memory Device
- Temporary storage elements
- Cardiac Monitoring Device
- Data
- Look-up Tables
- High-speed graphics pixel buffer
- Portable Information Devices
- IP Camera Buffer
- Telecommunication
