72V263L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 133.3MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Direction | Unidirectional |
| Density | 144 kb |
| Sync/Async | Synchronous |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V263L7-5PF Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .These are the 80 pins for operation.In order for FIFO design to operate, a maximum current of 35mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.A frequency of 133.3MHz is sufficient to maintain good accuracy.There is 133.3MHz FIFO memory IC's maximum value for regular operation.
72V263L7-5PF Features
Frequency at most
72V263L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V263L7-5PF FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Alarm System
- Portable Information Devices
- Switches
- Computer Systems
- Disk Controllers
- Temporary storage elements
- Smart Meter
- Data
- Laser Receiver System
