72V263L7-5PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V263L7-5PF8 Overview
TQFP is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V , high efficiency is possible.80 terminations are contained in FIFO means.80 pin is used for operation.In order to operate it, it requires 35mA volts of current.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.There are a total of 80 pins on this board.When the frequency is set to 133.3MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 133.3MHz .
72V263L7-5PF8 Features
FIFOs category
Frequency at most
72V263L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V263L7-5PF8 FIFOs Memory applications.
- Down-Hole Energy Drilling
- Look-up Tables
- Test Equipment
- Seismic Data Collection at Extreme Temperatures
- Communications Systems
- Measurement Equipment
- Battery Charger
- Computer networks
- SPD for DDR3 Memory Modules
- Optical memories
