72V265LA10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA10PF Overview
This package is included in TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are the operation pins.FIFO design requires 55mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.It has a OTHER FIFO memory type IC.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 100MHz , the system can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.It is also possible to generate RETRANSMIT by using this FIFO memory.
72V265LA10PF Features
FIFOs category
Frequency at most
72V265LA10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA10PF FIFOs Memory applications.
- Battery Charger
- Disk Controllers
- SPI Bus Flash Memory Device
- Signal processing
- Transistors
- SPD for DDR3 Memory Modules
- HDD
- Event Recorder
- Laser Receiver System
- Game Consoles
