72V265LA10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA10PF8 Overview
You will find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.High efficiency is possible with a supply voltage of 3.3V .As a result of this, FIFO means contains 64 terminations.64 pin is used for operation.In order to operate it, it requires 55mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , there is a self-contained gadget.This part has a memory type of OTHER FIFO .There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.A total of 64 pins are present on the FIFO memory IC.With a frequency of 100MHz , it maintains good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .Additionally, this FIFO memory can be used to generate RETRANSMIT .
72V265LA10PF8 Features
FIFOs category
Frequency at most
72V265LA10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA10PF8 FIFOs Memory applications.
- Notebook
- Laser Receiver System
- Programmable Logic Controller
- Game Consoles
- High-speed disk
- Network bridges
- Emulators
- Seismic Data Collection at Extreme Temperatures
- Test Equipment
- Queues for communication systems
