72V265LA10PFG
| Parameters | |
|---|---|
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 18b |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
72V265LA10PFG Overview
FIFO memory chip can be found in the TQFP package.Surface Mount is memory IC's recommended mounting method.Supply voltages of 3.3V are capable of achieving high efficiency.The number of terminations in FIFO means is 64 .Operation pins are 64 .In order for FIFO design to operate, a maximum current of 55mA is required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V V.As a result, it contains a total of 64 pins.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.It is also possible to generate RETRANSMIT using this FIFO memory.
72V265LA10PFG Features
FIFOs category
Frequency at most
72V265LA10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA10PFG FIFOs Memory applications.
- Code converters
- Analog-to-digital converters
- Look-up Tables
- Computers
- Industrial Systems
- Test site
- Computer networks
- SPD for DDR3 Memory Modules
- Video time base correction
- Routers
