72V265LA10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V265LA10PFG8 Overview
You can find FIFO memory chip in package TQFP .The recommended mounting way is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 64 terminations in FIFO means.These are the 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.Low supply voltages, such as 3V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.When the frequency is set to 100MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .Additionally, this FIFO memory is capable of generating RETRANSMIT as well.
72V265LA10PFG8 Features
FIFOs category
Frequency at most
72V265LA10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA10PFG8 FIFOs Memory applications.
- Data-acquisition systems
- Switches
- Notebook
- Portable Information Devices
- Computers
- Queues for communication systems
- SPI Bus Flash Memory Device
- TVs
- Network switching/routing
- Consumer
