72V265LA10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA10TF8 Overview
You can find FIFO memory chip in the LQFP package.It is pointing in the direction of Surface Mount .A supply voltage of 3.3V allows for high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are the operation pins.There is a maximum current requirement of 55mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 64 pins on this board.When the frequency is set to 100MHz , the system can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .This gadget can also be used to generate RETRANSMIT .
72V265LA10TF8 Features
FIFOs category
Frequency at most
72V265LA10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA10TF8 FIFOs Memory applications.
- Look-up Tables
- Communications
- Emulators
- Portable Information Devices
- Video Processing
- Portable Information Devices
- Magnetic memories
- Multimedia
- Computer networks
- Switches
