72V265LA10TFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V265LA10TFG8 Overview
FIFO memory chip is included in the TQFP package.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.64 terminations are contained in FIFO means.In the case of the operation pins, they are 64 pins.There is a maximum current requirement of 55mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Low supply voltages, such as 3V V, may be required for operation.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.This gadget can also be used to generate RETRANSMIT .
72V265LA10TFG8 Features
FIFOs category
Frequency at most
72V265LA10TFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA10TFG8 FIFOs Memory applications.
- PC peripheral
- Application that requires re-writable nonvolatile parameter memory
- Firmware loaders
- Look-up Tables
- Data-acquisition systems
- Battery Charger
- Portable Information Devices
- Data communications
- Data
- Smart Meter
