72V265LA15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA15PF8 Overview
FIFO memory chip is included in the TQFP package.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.There is a maximum current requirement of 55mA for its operation.A voltage of 3.3V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.When the frequency is set to 66.7MHz , the system can maintain good accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.It is also possible to generate RETRANSMIT by using this FIFO memory.
72V265LA15PF8 Features
FIFOs category
Frequency at most
72V265LA15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA15PF8 FIFOs Memory applications.
- Signal processing
- Down-Hole Energy Drilling
- Data-acquisition systems
- Magnetic memories
- Rate buffers
- Telecommunication
- Transistors
- Multimedia
- Emulators
- HDD
