72V265LA15TF
| Parameters | |
|---|---|
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
72V265LA15TF Overview
You will find FIFO memory chip in the LQFP package.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.There are 64 pins on the operation pins.FIFO design requires a maximum current of 55mA to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 3.6V volts.A total of 64 pins are present on the FIFO memory IC.A frequency of 66.7MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .This gadget can also be used to generate RETRANSMIT .
72V265LA15TF Features
FIFOs category
Frequency at most
72V265LA15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA15TF FIFOs Memory applications.
- Tape controllers
- Laser Receiver System
- Test Equipment
- Networking
- Look-up Tables
- Portable Information Devices
- Smart Meter
- Medical Monitoring Device
- General Data Collection Applications at Extreme High-Temperatures
- Video time base correction
