72V265LA15TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA15TF8 Overview
FIFO memory chip is contained in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 64 terminations.These are the 64 pins for operation.In order to operate FIFO design, a maximum current of 55mA is required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 64 pins on this board.A frequency of 66.7MHz is sufficient to maintain good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.This gadget can also be used to generate RETRANSMIT .
72V265LA15TF8 Features
FIFOs category
Frequency at most
72V265LA15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA15TF8 FIFOs Memory applications.
- Event Recorder
- High-speed graphics pixel buffer
- High-speed disk
- Computers
- Game Controller
- Controlled baseline
- Microprogramming
- MP3 Interface for Automobile
- Down-Hole Energy Drilling
- Data-acquisition systems
