72V265LA15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA15TFI Overview
The TQFP package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 64 .Operation pins are 64 .In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.With a frequency of 66.7MHz , it maintains good accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .
72V265LA15TFI Features
FIFOs category
Frequency at most
72V265LA15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA15TFI FIFOs Memory applications.
- Network switching/routing
- Video time base correction
- Programmable Logic Controller
- Controlled baseline
- HDD
- Communications Systems
- Disk Controllers
- PC peripheral
- Alarm System
- Data
