72V265LA15TFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA15TFI8 Overview
LQFP is a package that contains FIFO memory chip.It is pointing in the direction of Surface Mount .A supply voltage of 3.3V allows for high efficiency.The number of terminations in FIFO means is 64 .There are 64 pins for operation.There is a maximum current requirement of 55mA for its operation.In order to maximize efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.6V V.This FIFO memory IC is equipped with 64 pins in total.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.
72V265LA15TFI8 Features
FIFOs category
Frequency at most
72V265LA15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA15TFI8 FIFOs Memory applications.
- Test Equipment
- Character generators
- Signal processing
- Event Recorder
- PC peripheral
- Multimedia
- SPI Bus Flash Memory Devices
- General Data Collection Applications at Extreme High-Temperatures
- Switches
- Laser Receiver System
