72V265LA20TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V265LA20TF8 Overview
You will find FIFO memory chip in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 3.3V , high efficiency can be achieved.As a result of this, FIFO means contains 64 terminations.64 pins are the operation pins.In order to operate FIFO design, a maximum current of 55mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 64 pins in total.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .This gadget can also generate RETRANSMIT .
72V265LA20TF8 Features
FIFOs category
Frequency at most
72V265LA20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V265LA20TF8 FIFOs Memory applications.
- Measurement Equipment
- Video
- Transistors
- Industrial Systems
- IP Camera Buffer
- SPI Bus Flash Memory Devices
- Consumer
- Computer networks
- Extended product life cycle
- Code converters
