72V271LA10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V271LA10PFG Overview
You can find FIFO memory chip in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.FIFO means contains 64 terminations.Operation pins are 64 .FIFO design requires a maximum current of 55mA to operate.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.Low supply voltages, such as 3V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.It has a total of 64 pins on it.It is capable of maintaining good accuracy with a frequency of 100MHz .For regular operation, the memory logic's maximum value is 100MHz .This gadget can also be used to generate RETRANSMIT .
72V271LA10PFG Features
FIFOs category
Frequency at most
72V271LA10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA10PFG FIFOs Memory applications.
- Down-Hole Energy Drilling
- High-speed graphics pixel buffer
- MP3 Interface for Automobile
- Signal processing
- Character generators
- Application that requires re-writable nonvolatile parameter memory
- Industrial Systems
- Routers
- Networking
- Game Consoles
