72V271LA10TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA10TF Overview
You can find FIFO memory chip in the TQFP package.Mounting it in Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.It has a total of 64 pins on it.It maintains good accuracy at a 100MHz frequency.During regular operation, 100MHz is the FIFO memory's maximum value.This gadget can also generate RETRANSMIT; AUTO POWER DOWN .
72V271LA10TF Features
FIFOs category
Frequency at most
72V271LA10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA10TF FIFOs Memory applications.
- A/D output buffers
- Extended product-change notification
- Rate buffers
- Controlled baseline
- Game Consoles
- Code converters
- Product traceability
- Seismic Data Collection at Extreme Temperatures
- Look-up Tables
- Test Equipment
