72V271LA10TF8
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
72V271LA10TF8 Overview
FIFO memory chip is contained in the LQFP package.A Surface Mount mounting method is recommended.An input voltage of 3.3V results in high efficiency.64 terminations are contained in FIFO means.64 pins are used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.In the presence of a 100MHz frequency, it can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .With the help of this FIFO memory, RETRANSMIT; AUTO POWER DOWN can also be generated.
72V271LA10TF8 Features
FIFOs category
Frequency at most
72V271LA10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA10TF8 FIFOs Memory applications.
- Communications
- Battery Charger
- Computer networks
- Rate buffers
- Emulators
- SPI Bus Flash Memory Devices
- Fabrication Site
- Portable Information Devices
- Controlled baseline
- Microprogramming
