72V271LA15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA15PF Overview
FIFO memory chip is included in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.With a supply voltage of 3.3V volts, high efficiency is possible.A total of 64 terminations are contained within FIFO means.In the case of the operation pins, they are 64 pins.FIFO requires a minimum of 55mA current to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 64 pins in total.With a frequency of 66.7MHz , it exhibits good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.With the help of this FIFO memory, RETRANSMIT; AUTO POWER DOWN can also be generated.
72V271LA15PF Features
FIFOs category
Frequency at most
72V271LA15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA15PF FIFOs Memory applications.
- Data
- Portable Information Devices
- Microprogramming
- Industrial Systems
- Tape controllers
- Rate buffers
- Down-Hole Energy Drilling
- Seismic Data Collection at Extreme Temperatures
- PC peripheral
- Fabrication Site
