72V271LA15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA15PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 64 terminations.64 pin is used for operation.There is a maximum current requirement of 55mA for its operation.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.This FIFO memory IC is equipped with 64 pins in total.A frequency of 66.7MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .It is also possible to generate RETRANSMIT; AUTO POWER DOWN using this FIFO memory.
72V271LA15PF8 Features
FIFOs category
Frequency at most
72V271LA15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA15PF8 FIFOs Memory applications.
- Medical Monitoring Device
- Microprogramming
- Consumer Systems
- Firmware loaders
- Controlled baseline
- General Data Collection Applications at Extreme High-Temperatures
- Wireless
- Look-up Tables
- Programmable Logic Controller
- Event Recorder
