72V271LA15PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX9 |
| Standby Current-Max | 0.02A |
| Memory Density | 294912 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V271LA15PFGI8 Overview
FIFO memory chip can be found in the LQFP package.There's a Tape & Reel on the package.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V is capable of producing high efficiency.64 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 64 pins.FIFO design requires 55mA amps of current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.Its maximum operating temperature of 85°C °C ensures stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V V.There are a total of 64 pins on this board.Regular operation has a FIFO memory's maximum value of 66.7MHz .With the help of this FIFO memory, RETRANSMIT; AUTO POWER DOWN can also be generated.
72V271LA15PFGI8 Features
FIFOs category
Frequency at most
72V271LA15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA15PFGI8 FIFOs Memory applications.
- MP3 Interface for Automobile
- IP Camera Buffer
- Controlled baseline
- Rate buffers
- Network switching/routing
- Battery Charger
- Network bridges
- Smart Meter
- HDD
- Industrial Systems
