72V271LA15TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA15TF8 Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pin is used for operation.Its maximum operating current is 55mA .Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.There are a total of 64 pins on this board.When the frequency is set to 66.7MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .It is also possible to generate RETRANSMIT; AUTO POWER DOWN with the use of this FIFO memory.
72V271LA15TF8 Features
FIFOs category
Frequency at most
72V271LA15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA15TF8 FIFOs Memory applications.
- Data-acquisition systems
- High-speed disk
- Magnetic memories
- Telecommunication
- High-speed graphics pixel buffer
- TVs
- Network bridges
- MP3 Interface for Automobile
- Test site
- Temporary storage elements
