72V271LA15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA15TFI Overview
The TQFP package contains FIFO memory chip.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 64 terminations in FIFO means.Operation pins are 64 .In order to operate FIFO design, a maximum current of 55mA is required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is of the type OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.It consists of a total of 64 pins.In the presence of a 66.7MHz frequency, it can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.This gadget can also be used to generate RETRANSMIT; AUTO POWER DOWN .
72V271LA15TFI Features
FIFOs category
Frequency at most
72V271LA15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA15TFI FIFOs Memory applications.
- General Data Collection Applications at Low-Temperatures
- Notebook
- HDD
- Routers
- Data communications
- Transistors
- Consumer Systems
- TVs
- Rate buffers
- Controlled baseline
