72V271LA20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA20PF Overview
The TQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.High efficiency is possible with a supply voltage of 3.3V .FIFO means contains 64 terminations.There are 64 pins on the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.It consists of a total of 64 pins.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 50MHz .This gadget can also generate RETRANSMIT; AUTO POWER DOWN .
72V271LA20PF Features
FIFOs category
Frequency at most
72V271LA20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA20PF FIFOs Memory applications.
- Tape controllers
- Wireless
- Product traceability
- Rate buffers
- GPS Offender Tracking
- Microprogramming
- Smart Meter
- Cardiac Monitoring Device
- Portable Information Devices
- Test Equipment
