72V271LA20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V271LA20PF8 Overview
You can find FIFO memory chip in package TQFP .It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains a total of 64 terminations.As far as the operation pins are concerned, they are 64 pins.There is a maximum current requirement of 55mA for its operation.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 50MHz it can maintain good accuracy.The memory logic's maximum value is 50MHz for regular operation.It is also possible to generate RETRANSMIT; AUTO POWER DOWN by using this FIFO memory.
72V271LA20PF8 Features
FIFOs category
Frequency at most
72V271LA20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA20PF8 FIFOs Memory applications.
- MP3 Interface for Automobile
- Cardiac Monitoring Device
- Wireless
- Event Recorder
- Seismic Data Collection at Extreme Temperatures
- Fabrication Site
- Signal processing
- Look-up Tables
- General Data Collection Applications at Extreme High-Temperatures
- Test site
