72V271LA20TF
| Parameters | |
|---|---|
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX9 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
72V271LA20TF Overview
FIFO memory chip can be found in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.64 terminations are contained in FIFO means.There are 64 pins on the operation pins.Its maximum operating current is 55mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.The FIFO memory IC has a total of 64 pins.When the frequency is set to 50MHz it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 50MHz .Additionally, this FIFO memory is capable of generating RETRANSMIT; AUTO POWER DOWN as well.
72V271LA20TF Features
FIFOs category
Frequency at most
72V271LA20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V271LA20TF FIFOs Memory applications.
- Controlled baseline
- Analog-to-digital converters
- Alarm System
- Networking
- Product traceability
- Transistors
- IP Camera Buffer
- Programmable Logic Controller
- Disk Controllers
- Test Equipment
