72V273L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 80 |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | IT CAN ALSO BE CONFIGURED AS 32K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX18 |
| Standby Current-Max | 0.015A |
| Memory Density | 294912 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V273L10PF8 Overview
FIFO memory chip is included in the LQFP package.Tape & Reel (TR) case is used for packaging.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 80 terminations.The operation pins are 80 pins.There is a maximum current requirement of 35mA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 3.15V volts.The memory logic's maximum supply voltage is 3.45V volts.A total of 80 pins are present on the FIFO memory IC.100MHz is the FIFO memory IC's maximum value for regular operation.This gadget can also generate IT CAN ALSO BE CONFIGURED AS 32K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE .
72V273L10PF8 Features
FIFOs category
Frequency at most
72V273L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V273L10PF8 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- Optical memories
- Game Controller
- Transistors
- High-speed graphics pixel buffer
- Game Consoles
- Test site
- Routers
- Multimedia
- Switches
