72V273L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 80 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V273L10PFG8 Overview
FIFO memory chip can be found in the LQFP package.Mounting it Surface Mount is recommended.80 pins are used for operation.Its maximum operating current is 35mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 3.45V volts.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V273L10PFG8 Features
Frequency at most
72V273L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V273L10PFG8 FIFOs Memory applications.
- Firmware loaders
- Analog-to-digital converters
- SPI Bus Flash Memory Device
- Computer Systems
- Portable Information Devices
- Test site
- Network bridges
- Consumer Systems
- Network switching/routing
- Down-Hole Energy Drilling
