72V273L10PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Tape & Reel |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V273L10PFI8 Overview
TQFP is a package that contains FIFO memory chip.There's a Tape & Reel on the package.Mounting it in Surface Mount is recommended.High efficiency is possible with a supply voltage of 3.3V .80 terminations are contained in FIFO means.80 pins are the operation pins.For its operation, 35mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.The gadget in FIFOs is self-contained.It has a OTHER FIFO memory type IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.The FIFO memory IC is equipped with a total of 80 pins.A frequency of 100MHz is sufficient to maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V273L10PFI8 Features
FIFOs category
Frequency at most
72V273L10PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V273L10PFI8 FIFOs Memory applications.
- Multi-stage synchronizer
- Measurement Equipment
- Seismic Data Collection at Extreme Temperatures
- Extended product-change notification
- Firmware loaders
- TVs
- Game Consoles
- Extended product life cycle
- Product traceability
- Microprogramming
