72V273L6PF
| Parameters | |
|---|---|
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
72V273L6PF Overview
You can find FIFO memory chip in the TQFP package.There is a case Bulk in which it is packaged.A Surface Mount mounting method is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 80 terminations are contained within FIFO means.FIFO design has 80 operation pins.In order to operate FIFO design, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.This FIFO memory IC is equipped with 80 pins in total.With a frequency of 166MHz , it exhibits good accuracy.During regular operation, 166MHz is the FIFO memory's maximum value.
72V273L6PF Features
FIFOs category
Frequency at most
72V273L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V273L6PF FIFOs Memory applications.
- Magnetic memories
- Firmware loaders
- Video
- Network switching/routing
- Notebook
- Application that requires re-writable nonvolatile parameter memory
- Transistors
- HDD
- Microprogramming
- Code converters
