72V273L6PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V273L6PFG Overview
You can find FIFO memory chip in package TQFP .This FIFO memory chip is packaged as a Bulk .A Surface Mount mounting method is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 80 terminations are contained within FIFO means.Operation pins are 80 .In order for FIFO design to operate, a maximum current of 35mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is contained within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.The FIFO memory chip may be operated at very low supply voltages, such as3.15V volts.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.The FIFO memory IC is equipped with a total of 80 pins.When the frequency is set to 166MHz , the system can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 166MHz .
72V273L6PFG Features
FIFOs category
Frequency at most
72V273L6PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V273L6PFG FIFOs Memory applications.
- Medical Monitoring Device
- Controlled baseline
- Data communications
- Programmable Logic Controller
- Address mapping
- Transistors
- Cameras
- Thermal Management for DDR3 Memory Modules
- Networking
- Down-Hole Energy Drilling
