72V273L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V273L7-5PF Overview
You will find FIFO memory chip in the TQFP package.Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains 80 terminations.FIFO design has 80 operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum voltage of 3.45V volts can be applied to FIFO memory.There are a total of 80 pins on this board.In spite of the frequency 133.3MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 133.3MHz .
72V273L7-5PF Features
FIFOs category
Frequency at most
72V273L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V273L7-5PF FIFOs Memory applications.
- Transistors
- TVs
- Analog-to-digital converters
- Extended product-change notification
- Communications
- Alarm System
- Look-up Tables
- Queues for communication systems
- Firmware loaders
- Computer networks
