72V273L7-5PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 16KX18 |
| Density | 288 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V273L7-5PF8 Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.As a result of this, FIFO means contains 80 terminations.Operation pins are 80 .Its maximum operating current is 35mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.It has a total of 80 pins on it.It is capable of maintaining good accuracy with a frequency of 133.3MHz .The memory logic's maximum value is 133.3MHz for regular operation.
72V273L7-5PF8 Features
FIFOs category
Frequency at most
72V273L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V273L7-5PF8 FIFOs Memory applications.
- Communications Systems
- Network switching/routing
- Microprogramming
- Buses
- SPI Bus Flash Memory Devices
- Computer Systems
- One assembly
- Cardiac Monitoring Device
- Industrial Systems
- Signal processing
