72V275L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Standby Current-Max | 0.02A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V275L10PFG Overview
LQFP is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.An input voltage of 3.3V results in high efficiency.64 terminations are contained in FIFO means.FIFO design has 64 operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.The IC of the part is OTHER FIFO memory type.In some cases, FIFO operates at a very low supply voltage, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.As a result, it contains a total of 64 pins.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V275L10PFG Features
FIFOs category
Frequency at most
72V275L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V275L10PFG FIFOs Memory applications.
- Communications
- Product traceability
- Consumer Systems
- Cardiac Monitoring Device
- SPI Bus Flash Memory Devices
- Extended product-change notification
- Queues for communication systems
- Emulators
- Seismic Data Collection at Extreme Temperatures
- Alarm System
