72V275L10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER-DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V275L10TF8 Overview
You will find FIFO memory chip in the LQFP package.It's packaged in the shape of a Tape & Reel .It is pointing in the direction of Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 64 terminations can be found in FIFO means.These are the 64 pins for operation.FIFO design requires 60mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 64 pins on this board.It maintains good accuracy at a 100MHz frequency.There is 100MHz FIFO memory IC's maximum value for regular operation.It is also possible to generate RETRANSMIT; AUTO POWER-DOWN using this FIFO memory.
72V275L10TF8 Features
FIFOs category
Frequency at most
72V275L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V275L10TF8 FIFOs Memory applications.
- Battery Charger
- Seismic Data Collection at Extreme Temperatures
- Rate buffers
- Data communications
- Magnetic memories
- Application that requires re-writable nonvolatile parameter memory
- PC peripheral
- Notebook
- Digital buffering
- Multimedia
