72V275L15PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX18 |
| Standby Current-Max | 0.02A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V275L15PFG8 Overview
FIFO memory chip is contained in the LQFP package.There's a Tape & Reel (TR) on the package.Surface Mount is recommended as the mounting method.High efficiency is possible with a supply voltage of 3.3V .The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.FIFO requires a minimum of 60mA current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget in FIFOs is self-contained.The IC of the part is OTHER FIFO memory type.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.A total of 64 pins are present on the FIFO memory IC.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V275L15PFG8 Features
FIFOs category
Frequency at most
72V275L15PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V275L15PFG8 FIFOs Memory applications.
- Computer Systems
- High-speed disk
- SPI Bus Flash Memory Devices
- Signal processing
- Communications
- Thermal Management for DDR3 Memory Modules
- IP Radio
- Portable Information Devices
- Microprogramming
- Video
