Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
64 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
64 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.8mm |
Frequency |
66.7MHz |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
64 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Element Configuration |
Dual |
Nominal Supply Current |
60mA |
Max Supply Current |
60mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
32KX18 |
Density |
576 kb |
Standby Current-Max |
0.02A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
18b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
14mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72V275L15PFI8 Overview
The TQFP package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains 64 terminations.The operation pins are 64 pins.For its operation, 60mA is the maximum current required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .It has a OTHER FIFO memory type IC.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.The memory logic's maximum supply voltage is 3.6V volts.There are a total of 64 pins on this board.It maintains good accuracy at a 66.7MHz frequency.The memory logic's maximum value is 66.7MHz for regular operation.
72V275L15PFI8 Features
FIFOs category
Frequency at most
72V275L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V275L15PFI8 FIFOs Memory applications.
- Disk Controllers
- Multimedia
- Transistors
- Data
- IP Radio
- Video Processing
- Routers
- Medical Monitoring Device
- Controlled baseline
- A/D output buffers