72V275L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V275L20PF Overview
FIFO memory chip is included in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 3.3V results in high efficiency.FIFO means contains a total of 64 terminations.There are 64 pins for operation.In order for FIFO design to operate, a maximum current of 60mA is required.A voltage of 3.3V should be used for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.It consists of a total of 64 pins.A frequency of 50MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .
72V275L20PF Features
FIFOs category
Frequency at most
72V275L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V275L20PF FIFOs Memory applications.
- GPS Offender Tracking
- Optical memories
- Signal processing
- Game Controller
- Desktop Computers
- Notebook
- Look-up Tables
- Game Consoles
- HDD
- SPD for DDR3 Memory Modules
