72V281L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V281L10PF Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V allows for high efficiency.I found that it has 64 terminations in FIFO means.These are the 64 pins for operation.In order for FIFO design to operate, a maximum current of 55mA is required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.There are a total of 64 pins on this board.It maintains good accuracy at a 100MHz frequency.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V281L10PF Features
FIFOs category
Frequency at most
72V281L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V281L10PF FIFOs Memory applications.
- Network bridges
- IP Radio
- Data communications
- Wireless
- Computer networks
- Game Controller
- Computers
- Digital buffering
- High-speed graphics pixel buffer
- Buses
