72V281L10PF8
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
72V281L10PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains 64 terminations.These are the 64 pins for operation.In order for FIFO design to operate, a maximum current of 55mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.As a result, it contains a total of 64 pins.During regular operation, 100MHz is the FIFO memory's maximum value.
72V281L10PF8 Features
FIFOs category
Frequency at most
72V281L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V281L10PF8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- Data communications
- IP Camera Buffer
- Portable Information Devices
- Emulators
- Tape controllers
- Thermal Management for DDR3 Memory Modules
- High-speed disk
- Test site
- Communications Systems
