72V281L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V281L10PFG8 Overview
FIFO memory chip is contained in the TQFP package.Surface Mount is memory IC's recommended mounting method.With a supply voltage of 3.3V volts, high efficiency is possible.FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.70°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .
72V281L10PFG8 Features
FIFOs category
Frequency at most
72V281L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V281L10PFG8 FIFOs Memory applications.
- Character generators
- Notebook
- SPD for DDR3 Memory Modules
- High-speed disk
- Digital buffering
- Firmware loaders
- Extended product-change notification
- Data communications
- Video Processing
- Medical Monitoring Device
