72V281L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V281L15PF Overview
You can find FIFO memory chip in the TQFP package.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 64 terminations.64 pins are the operation pins.In order to operate FIFO design, a maximum current of 55mA is required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.The memory logic's maximum supply voltage is 3.6V volts.Approximately 64 pins are attached to it.It maintains good accuracy at a 66.7MHz frequency.Normally, the FIFO memory's maximum value is 66.7MHz .
72V281L15PF Features
FIFOs category
Frequency at most
72V281L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V281L15PF FIFOs Memory applications.
- Disk Controllers
- Desktop Computers
- Microprogramming
- Extended product-change notification
- Multimedia
- Game Controller
- Digital buffering
- Rate buffers
- PC peripheral
- Extended product life cycle
