72V281L15PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V281L15PFGI Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 64 .64 pins are the operation pins.The maximum current required for its operation is 55mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .This part has a memory type of OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.6V V.Approximately 64 pins are attached to it.When the frequency is set to 66.7MHz , the system can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V281L15PFGI Features
FIFOs category
Frequency at most
72V281L15PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V281L15PFGI FIFOs Memory applications.
- Network switching/routing
- Telecommunication
- Extended product life cycle
- Laser Receiver System
- GPS Offender Tracking
- Networking
- Data communications
- Multi-stage synchronizer
- Routers
- Measurement Equipment
