72V281L15TF
| Parameters | |
|---|---|
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
72V281L15TF Overview
FIFO memory chip is contained in the LQFP package.The recommended mounting way is Surface Mount .An input voltage of 3.3V results in high efficiency.As a result of this, FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.FIFO requires a minimum of 55mA current to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.The FIFO memory IC has a total of 64 pins.With a frequency of 66.7MHz , it exhibits good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V281L15TF Features
FIFOs category
Frequency at most
72V281L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V281L15TF FIFOs Memory applications.
- Multi-stage synchronizer
- Address mapping
- Digital buffering
- Video time base correction
- Computers
- Product traceability
- Code converters
- HDD
- Measurement Equipment
- Communications
