72V281L15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 576 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V281L15TFI Overview
FIFO memory chip is contained in the TQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.In FIFO means, there are 64 terminations.There are 64 pins on the operation pins.Its maximum operating current is 55mA .FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.A total of 64 pins are present on the FIFO memory IC.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V281L15TFI Features
FIFOs category
Frequency at most
72V281L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V281L15TFI FIFOs Memory applications.
- Portable Information Devices
- IP Radio
- Application that requires re-writable nonvolatile parameter memory
- Tape controllers
- Network bridges
- Data communications
- Controlled baseline
- Cameras
- Multi-stage synchronizer
- Medical Monitoring Device
