72V281L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V281L20PF Overview
TQFP is the package in which FIFO memory chip is contained.The recommended mounting way is Surface Mount .A supply voltage of 3.3V allows for high efficiency.I found that it has 64 terminations in FIFO means.FIFO design has 64 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 50MHz , the system can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .
72V281L20PF Features
FIFOs category
Frequency at most
72V281L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V281L20PF FIFOs Memory applications.
- Industrial Systems
- Computers
- PC peripheral
- Game Controller
- Wireless
- Multi-stage synchronizer
- Smart Meter
- Portable Information Devices
- Address mapping
- Event Recorder
