72V281L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V281L20PF8 Overview
FIFO memory chip can be found in the TQFP package.It is pointing in the direction of Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.As a result of this, FIFO means contains 64 terminations.64 pins are used for operation.In order for FIFO design to operate, a maximum current of 55mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.A total of 64 pins are present on the FIFO memory IC.When the frequency is set to 50MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 50MHz .
72V281L20PF8 Features
FIFOs category
Frequency at most
72V281L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V281L20PF8 FIFOs Memory applications.
- Product traceability
- Fabrication Site
- Computer networks
- Switches
- Medical Monitoring Device
- PC peripheral
- Game Controller
- Event Recorder
- Consumer Systems
- Telecommunication
