72V281L20TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V281L20TF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.A supply voltage of 3.3V is capable of producing high efficiency.In FIFO means, there are 64 terminations.FIFO design has 64 operation pins.Its maximum operating current is 55mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , there is a self-contained gadget.It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum voltage of 3.6V volts can be applied to FIFO memory.As a result, it contains a total of 64 pins.A frequency of 50MHz is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 50MHz .
72V281L20TF Features
FIFOs category
Frequency at most
72V281L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V281L20TF FIFOs Memory applications.
- Product traceability
- Application that requires re-writable nonvolatile parameter memory
- Network bridges
- Data-acquisition systems
- Firmware loaders
- Controlled baseline
- Extended product-change notification
- SPD for DDR3 Memory Modules
- Portable Information Devices
- Programmable Logic Controller
